Prop Guard® will vastly improve safety, and can give you better overall performance!
Available for both outboard engines from 8 to 350 horsepower and stern drives.
For over fifty years the same basic technology employed in the Prop Guard® has been successfully used worldwide by canal boats, river boats, and commercial fishing vessels to achieve greater propeller thrust plus substantial fuel savings. Now, aher years of research and testing, these same benefits, plus much more, are available to pleasure boat owners at an unbelievable low cost.
Prop Guards will fit all Manufacturers Outboards and Stern Drives.
Note: All hp's with Big Foot & High Thrust applications require next size up.
ALL APPLICATIONS of the 13", and 14" Prop Guards are for PONTOON AND DECK BOATS, and any other application that the vessel does not exceed 25 mph. The 16" is now the NEW HIGH Speed Design.
To obtain optimal performance out of your motor with the Prop Guard® installed, you may need to change your propeller diameter :
14” Prop Guard® (Red) fits / 70hp to 100hp (except Big Foot & High Thrust, Req.16”) (these may be changing to Black)
The closer the prop blades are to the Prop Guard® rings, it will optimize your performance, handling and will not create a drag. Your motor will also have to be trimmed to a setting of optimal performance (Refer to Fig. B).
Be sure the Prop Guard® you purchase is the correct size. Place it on your motor with Grip Clamps first and CHECK YOUR CLEARANCES BEFORE DRILLING HOLES AND MOUNTING.
Manufacturer will not warrant your Prop Guard® should you drill into Prop Guard® and find you have purchased the wrong size.
Above all, please take your time in measuring and selecting the proper size Prop Guard®.
Consult your Marine Dealer or bring your motor by for an inspection for proper size.
Note: Boats, motors and life rafts should not be purchased without verifying availability. Please call or click the button to the right to get started. ==================================================>>